Question from sarah

Hi Debra,

What is your opinion of EcoDent toothpaste? Is this a natural product and good for health – no additives, etc.?

Thanks!

Sarah

Debra’s Answer

First of all, Ecodent does not make toothpaste, they make tooth powders. I have used them and really like them–in fact I probably will be buying more very soon since I have been trying out some other tooth powders I didn’t like.

I actually prefer tooth powders over toothpaste. Ecodent toothpowders contain minerals and herbs, no sweeteners or sodium lauryl sulfate.

All Ecodent dental care products are fine with me.

Add Comment

Question from Srini

I am trying to find a good shampoo which is totally natural.

Some people recommended Aubrey but that product does not produce lather at all and my hair was stripping due to the friction.

Any suggestions would be welcome.

Debra’s Answer

Readers?

Add Comment

Question from Debbie

Hello,

I have not made my house green and am finding this website to be a valuable tool.

We just bought new kitchen cabinets which was a mistake. We are going to put them in a heated garage for at least 6 months before we install. Anyone recommend something to lock the VOC’s in. They are all wood cabinets but the stains and glues probably are not low VOC. Any help would be greatly, greatly appreciated!

Thanks,

Debbie

Debra’s Answer

If you are airing the cabinets in a heated garage for at least 6 months, you probably will not need to seal them.

Add Comment

Question from Lauri

Hi,

The edges of a few of the tiles on my kitchen floor have loosened, and are sticking up. I have tripped over them one too many times, and am afraid of getting seriously injured. The tiles, themselves, do not appear to be loose, just whatever is keeping them attached at their edges to the floor. Are there any products that are odorless and chemical-free that anyone can suggest to stick the edges back down? I am extremely sensitive to the odor from adhesive or caulk, and just don’t know what to use. Thank you, all, and a big thank you to Debra, for this wonderful newsletter.

Debra’s Answer

Just use regular white or yellow woodworking glue such as Elmer’s.

Add Comment

Question from Debbie

I have MCS and really bad scent sensitivities. I am looking for a laundry stain remover without smells, without petrochemicals and that actually works. Do you know of any?

Debra’s Answer

Readers?

Add Comment

Question from Abby Sernoff

Hi I recently found out I am allergic to formaldehyde. I am trying my best to eliminate it from my environment, which is proving quite challenging!

I am aware that it is highly present in permanent press fabrics and poly/cotton blends, but I have read varying things about the presence of formaldehyde in 100% polyester.

Any help would be appreciated. Thanks 🙂

Debra’s Answer

I don’t know about formaldehyde used on polyester. It’s not the kind of thing I would research because I have no interest in polyester fabric, entirely made from petrochemicals.

If you wanted to find out, I suggest researching the manufacture of polyester fabric, online or in the library. There are books and journals about textile manufacture–even an encyclopedia may be helpful.

Add Comment

Question from Gigi

Dear Debra,

I have read your recommended safe solutions for insulation in “Home Safe Home”. I have also searched the Q&A section.

However, it is not clear to me if the advice givens covers unfinished attics.

We currently have blown fiberglass insulation on the floor of the attic. It has been there at least 20 years.

On the wall adjoining of the attic that adjoins a room, there is fiberglass batting with a layer of plastic over it. There is no drywall covering the fiberglass on that wall.

There is no insulation on the sloping roof portion of the attic.

Debra’s Answer

I’m not an expert on installing insulation, but I know some of my readers are.

So, readers, what are your recommendations?

Add Comment

Question from Hi Debra,

Have you ever heard of Scanpan cookware? Its made in Denmark, and their products are made of a creamic-titanium compound. Their website is www.scanpan.com. I was considering purchasing one of their large pots which is on sale at a local store, but I wanted to get your opinion on the safety of this product.

Thanks so much for all you do. I love your website!

Laurel

Debra’s Answer

OK. Here’s the deal on Scanpan.

First, there seem to be several types of cookware made by this company. The one I think you are asking about–the one with the ceramic-titanium finish–is their Classic New Tek.

At www.scanpancookware.com/pages/scanpan-background-pv-c0-6.html it says the following:

“Both ceramic and titanium are incredibly hard materials. After having pressure-cast the raw pan body, the ceramic-titanium compound is super-heated to 36,000º F (thirty six thousand degrees!) at which point it liquefies. The ceramic-titanium enters a “plasma state”. That liquid plasma is then fired into the pan surface at twice the speed of sound. Lots of heat and impact. The ceramic-titanium literally anchors itself in the aluminum surface and becomes one with the pan.” So far, so good.

“When looking at SCANPAN CLASSIC NEW TEK under a microscope, we see something like a lunar landscape. A myriad of mini-craters, all similar in size and shape. These craters were created when firing the ceramic-titanium compound into the cooking surface, and are then filled with our specially formulated NEW TEK non-stick compound. The compound is in the craters, not on them. The ceramic-titanium protects it from being scraped away. Even if you use a metal spatula.” This is the part I am concerned about. They say their nonstick coating is PFOA-free, but that’s all we know about it.

The selling feature of the Scanpan is that you can’t scrape away the nonstick finish, but the nonstick finish is still there.

Add Comment

Question from Mary

My old nylon, I think, shower curtain has a trace of mildew on it. It is at least ten years old. It is time to replace it.

I live in an apartment and do not have a clothes line to air it on. I don’t want to have to launder it frequently. I do have a bathroom window and I do mop up the shower after every use.

Are there natural fiber shower curtains that would remain mold-free for an extended period of time?

Are there nylon shower curtains available without Teflon coating? Do you or your readers know where to find one?

If a polyester shower curtain doesn’t say it is Teflon coated, can I presume it isn’t?

As always, thank you for this wonderful website!

Debra’s Answer

I don’t know of a natural fiber shower curtain that wouldn’t have mildew problems.

And having not shopped for nylon or polyester curtains, don’t know about the finishes you mention.

Readers, any suggestions? In this case, seems like a nylon curtain would be the better choice, as nylon is one of the least toxic plastics.

Ordinarily I would recommend putting in glass doors, but this reader can’t do that in a rented apartment.

Add Comment

Question from Lucy Hemmendinger

I am in the process of replacing my old gas dryer with an electric. After much searching on line and in stores, I have not found a safe, reliable dryer with a stainless steel drum that I had hoped.

Consumer Reports recommends models with terrible repair histories so I am not trusting them. I have decided to go with a Whirlpool because all the repair guys recommend it, but Whirlpool does not make stainless steel drums. Does anyone know any reason why the enamel or powdercoated could be a problem, providing they pass the initial sniff test? Could they off-gas when heated?

Alternatively, has anyone purchased an electric dryer that they recommend? I don’t needs bells and whistles but am willing to pay for a reliable and safe model. I almost bought an LG with a stainless steel drum, then discovered they have terrible repair and customer relations records. I live in a rural area where repairs can be problematic and, of course I don’t want the headache of repairs.

Any other cautions or concerns about a new dryer would be appreciated as well as happy ending stories.

thank you

Lucy with wet clothes

Debra’s Answer

I have no objection to dryers with enamel or powdercoated drums from a health viewpoint. They do not outgas.

Readers, what are your recommendations?

Add Comment